blend protocol
Tesamorelin 5mg + Ipamorelin 5mg (10mg Blend) Dosage Protocol
Tesamorelin 5mg + Ipamorelin 5mg dosage chart for the 10mg Blend: typical dose 125 mcg–1 mg daily, reconstitution to 3.33 mg/mL, and protocol.
Tesamorelin 5mg + Ipamorelin 5mg Dosage Chart
Tesamorelin is dosed at 125 mcg–1 mg daily by subcutaneous injection in educational protocols, typically at night. A 10mg blend reconstituted with bacteriostatic water yields about 3.33 mg/mL. This information is for research and educational use only.
- Reconstitute: Add 3.0 mL bacteriostatic water to the 10 mg vial → ~3.33 mg/mL total (1.67 mg/mL each peptide).
- Typical daily range: 250–2000 mcg tesamorelin + 125–1000 mcg ipamorelin (gradual titration).
- Easy measuring: At 3.33 mg/mL total, 1 unit = 0.01 mL ≈ 16.7 mcg of each peptide on a U‑100 insulin syringe.
- Storage: Lyophilized: refrigerate at 2–8 °C (35.6–46.4 °F); after reconstitution, use immediately or refrigerate and use within 24–48 hours[5].
This blend combines tesamorelin, a synthetic GHRH analog, with ipamorelin, a selective ghrelin mimetic (growth hormone secretagogue). When administered together, GHRH analogs and ghrelin mimetics produce synergistic GH pulses[1][2]. The FDA‑approved tesamorelin dose is 2 mg SC daily[3], while ipamorelin is commonly studied at 100–300 mcg SC daily[4]. This educational protocol presents a once‑daily subcutaneous approach with gradual titration using a 1:1 blend ratio.
Related research: For distinct compound, component, or formulation evidence and safety context, read Tesamorelin Peptide: Benefits, Uses, Side Effects, Dosage, and Research and Ipamorelin Peptide: Benefits, Uses, Side Effects, Dosage, and Research. These links are comparisons only; the compounds and formulations should not be treated as interchangeable.
Dosing & Reconstitution Guide
Educational guide for reconstitution and daily dosing
Standard / Gradual Approach (3 mL = ~3.33 mg/mL total)
Route: Subcutaneous (SC) | Frequency: Once daily
| Week | Tesamorelin Dose | Ipamorelin Dose | Units (mL) |
|---|---|---|---|
| Weeks 1–2 | 250 mcg (0.25 mg) | 125 mcg (0.125 mg) | 23 units (0.23 mL) |
| Weeks 3–4 | 500 mcg (0.5 mg) | 250 mcg (0.25 mg) | 45 units (0.45 mL) |
| Weeks 5–6 | 1000 mcg (1.0 mg) | 500 mcg (0.5 mg) | 90 units (0.90 mL) |
| Weeks 7–10 | 1500 mcg (1.5 mg) | 750 mcg (0.75 mg) | 135 units (1.35 mL) |
| Weeks 11–16 | 2000 mcg (2.0 mg) | 1000 mcg (1.0 mg) | 180 units (1.80 mL) |
Note: The 1:1 blend ratio means tesamorelin and ipamorelin are present in equal amounts per mL. At 3.0 mL reconstitution: 1 mL = 1.67 mg tesamorelin + 1.67 mg ipamorelin. Higher‑volume injections (≥1.0 mL) may be split across two sites if preferred for comfort.
Reconstitution Steps
- Draw 3.0 mL bacteriostatic water with a sterile syringe.
- Inject slowly down the vial wall; avoid foaming.
- Gently swirl/roll until dissolved (do not shake).
- Label and refrigerate at 2–8 °C (35.6–46.4 °F), protected from light; use within 24–48 hours[5].
Protocol Overview
Concise summary of the once‑daily regimen.
- Goal: Support pulsatile GH release through dual GHRH + ghrelin pathway stimulation[1][2].
- Schedule: Daily subcutaneous injections for 8–16 weeks.
- Dose Range: Tesamorelin 250–2000 mcg + ipamorelin 125–1000 mcg daily with gradual titration.
- Reconstitution: 3.0 mL per 10 mg vial (~3.33 mg/mL total) for accurate unit measurements.
- Storage: Lyophilized refrigerated 2–8 °C; reconstituted use immediately or within 24–48 hours.
Dosing Protocol
Suggested daily titration approach.
- Start: 250 mcg tesamorelin + 125 mcg ipamorelin daily; increase every 2 weeks.
- Target: 1500–2000 mcg tesamorelin + 750–1000 mcg ipamorelin by Weeks 7–16.
- Frequency: Once per day (subcutaneous).
- Cycle Length: 8–16 weeks.
- Timing: Evening or bedtime administration may align with natural GH secretion patterns[4]; rotate injection sites.
Storage Instructions
Proper storage preserves peptide quality.
- Lyophilized: Store at 2–8 °C (35.6–46.4 °F) in dry, dark conditions; may be kept at ≤25 °C (77 °F) up to 3 months after dispensing[5].
- Reconstituted: Inject immediately after reconstitution; if stored, refrigerate and use within 24–48 hours; do not freeze[5].
- Allow vials to reach room temperature before opening to reduce condensation uptake.
Important Notes
Practical considerations for consistency and safety.
- Use new sterile insulin syringes; dispose in a sharps container.
- Rotate injection sites (abdomen, thighs, upper arms) to reduce local irritation[5][6].
- Inject slowly; wait a few seconds before withdrawing the needle.
- Document daily dose and site rotation to maintain consistency.
- Higher‑volume injections (≥1.0 mL) may be split between two sites for comfort.
How This Works
Tesamorelin is a synthetic 44‑amino‑acid GHRH analog that stimulates pituitary GH release[3]. Ipamorelin is a pentapeptide ghrelin mimetic that acts on the GHS‑R1a receptor, selectively stimulating GH secretion without significantly affecting cortisol, prolactin, or ACTH[4][7]. Combined GHRH + GHRP/ghrelin‑mimetic administration produces synergistic, amplified GH pulses compared to either agent alone[1][2]. Human pharmacokinetic studies show ipamorelin achieves peak GH release approximately 40 minutes post‑dose[8].
Potential Benefits & Side Effects
Observations from preclinical and clinical literature.
- Enhanced pulsatile GH secretion through dual‑pathway stimulation[1][2].
- Tesamorelin (2 mg/day) demonstrated reductions in trunk fat and visceral adipose tissue in HIV‑associated lipodystrophy trials[3][9].
- Ipamorelin shows high GH selectivity with minimal impact on cortisol or other hormones[4][7].
- Common adverse events with tesamorelin include injection‑site reactions (erythema, pruritus), arthralgia, and peripheral edema[5][9].
- Ipamorelin is generally well tolerated; transient flushing or headache may occur[7].
Lifestyle Factors
Complementary strategies for best outcomes.
- Pair with a balanced, protein‑forward diet tailored to energy needs.
- Combine resistance training and aerobic activity to reinforce metabolic adaptations.
- Prioritize sleep and stress management to support adherence and recovery.
- Evening dosing may align with natural nocturnal GH secretion patterns.
Injection Technique
General subcutaneous guidance from clinical best‑practice resources[6].
- Clean the vial stopper and skin with alcohol; allow to dry.
- Pinch a skinfold; insert the needle at 45–90° into subcutaneous tissue[6][10].
- Do not aspirate for subcutaneous injections; inject slowly and steadily[6].
- Rotate sites systematically (abdomen, thighs, upper arms) to avoid lipohypertrophy[5][11].
Important Note
This content is for educational purposes only and is not medical advice.
References
-
PMC — The Safety and Efficacy of Growth Hormone Secretagogues
— GHRH + GHRP synergy; dual pathway GH stimulation mechanisms -
Endocrine Reviews — Growth Hormone Secretagogues
— Synergistic amplification of GH release with combined GHRH and ghrelin mimetics -
NCBI LiverTox — Tesamorelin
— Synthetic GHRH analog; recommended dose 2 mg SC daily for HIV lipodystrophy -
PubMed — Ipamorelin, the first selective growth hormone secretagogue
— High GH potency and selectivity; no cortisol/ACTH effect -
FDA Egrifta (tesamorelin) Label
— SC abdomen injection; rotate sites; storage and reconstitution guidance -
CDC — Vaccine Administration: Subcutaneous Injection
— Subcutaneous injection technique (45° angle, pinch skin, no aspiration) -
European Journal of Endocrinology — Ipamorelin GH selectivity
— Potent and specific GH release without affecting cortisol, prolactin, or FSH/LH -
PubMed — Pharmacokinetic-pharmacodynamic modeling of ipamorelin
— Human GH release peaked ~0.67 h post-dose -
JAMA — Tesamorelin for Abdominal Fat in HIV
— Phase 3 trials demonstrating visceral fat reduction with tesamorelin -
CDC — Vaccine Administration During
— General subcutaneous route guidance (angle/site) -
NCBI Bookshelf — Best Practices for Injection
— Asepsis, preparation, and administration guidance -
PMC — Subcutaneous Drug Injection Review
— Pharmacologic considerations of the subcutaneous route -
Drugs — Tesamorelin: A Review
— Comprehensive review of tesamorelin pharmacology and clinical use